Use the ShellMountOperation dialogs we have to implement a DBus API
allowing other processes to display them.
Since GtkMountOperation now tries to call into our DBus implementation,
every application that uses a GtkMountOperation will gain integration
with our shell dialogs (but will still handle the actual communication
with GVfs).
Florian Müllner [Fri, 22 Jun 2012 11:51:43 +0000 (13:51 +0200)]
userMenu: Rename 'Hidden' to 'Invisible'
Apparently only the Telepathy API calls this status 'Hidden',
Empathy and most network use 'Invisible' (also see
https://bugzilla.gnome.org/show_bug.cgi?id=603472).
Cosimo Cecchi [Wed, 20 Jun 2012 00:22:26 +0000 (20:22 -0400)]
automount: re-use the same dialog when passphrase doesn't match
Wait until the completion of the mount operation before dismissing the
passphrase dialog, so in case it fails, we can re-use the same dialog
with an error message (like e.g. PolicyKit auth dialogs) instead of
showing a brand new one.
Cosimo Cecchi [Tue, 19 Jun 2012 17:50:37 +0000 (13:50 -0400)]
NetworkMenu: prefer wifi/3g over vpn in the panel
Wifi and mobile broadband have signal indicators and are thus
more useful than vpn icons in the panel. Therefore, in the case
we have both wifi/3g and VPN we prefer the former as the "primary
icon" and add a lock next to it.
Behavior when VPN is added to wired or other connections is still
preserved: the wired icon is replaced by vpn.
Sorting by strength is what the other OSes do by default, and it
provides a better UX (by offering your hotspot and router before
the one from your neighbor).
Cosimo Cecchi [Tue, 19 Jun 2012 19:08:45 +0000 (15:08 -0400)]
autorun: change logic for ignoring volumes
Previously, a volume was being ignored from autorun if one of these two
conditions were met:
- its mount root file had a native scheme and was mounted in a
non-hidden location
- it had a volume that could have been automounted, and had a flag set
by the shell to allow autorun
In order to effectively ignore volumes that we don't mount ourselves
from our notification system, we have to meet both conditions at the
same time instead.
Cosimo Cecchi [Tue, 19 Jun 2012 20:31:24 +0000 (16:31 -0400)]
mount-operation: fix exceptions when showing password entry
This is a fallout from some changes in MessageTray.Source, which now
requires either defining the iconName/iconType properties on it, or
implementing createNotificationIcon, and we're not doing any of those.
Fix it by storing the gicon of the source object and using a helper
method to create the icon actor on demand, to avoid any case when the
same actor might be added twice to different containers.
Disable unredirection when a modal operation is active
When the shell takes control of the screen (for example to show
a modal dialog or to lock the screen), it must reestablish itself
on top of the stack, and in particular restore any unredirected
window so that it is composited below the Shell UI.
Florian Müllner [Thu, 17 May 2012 16:18:53 +0000 (18:18 +0200)]
shell-app: Update app menu if necessary
Currently we assume that GTK_UNIQUE_BUS_NAME is shared between all
windows of an application. This assumption does not hold true for
applications that specify G_APPLICATION_NON_UNIQUE, so make sure
to update the menu as necessary.
There is a race if a channel is invalidated during its preparation: the
'invalidated' signal is already emitted so the Shell will never notice.
We fix this by simply checking if the channel is already invalidated when
receiving it from telepathy-glib.
In the approving case, we reject the full ChannelDispatchOperation as we only
support approving one channel at the time.
Initially, extensions were loaded after they shell had fully created
the session and all objects, but this didn't allow extensions easy
ways to monkey patch prototypes, as most functions had already been
bound. Remove the historical vestigal function, and just merge the
two together.
A large amount of extensions have something like this in them:
function init() {}
Since we have encouraged extension authors to try and not make any
changes in init, it feels weird and strange to have to create an
initialization function that does nothing. From now on, don't require
it.
extensionUtils: Remove version check for js-version
This is seldomly used, and isn't checked in SweetTooth. Just remove
this inconsistency here rather than adding infrastructure to manage
and check it elsewhere.
Florian Müllner [Tue, 12 Jun 2012 20:18:10 +0000 (22:18 +0200)]
st: Trigger theme updates on resolution changes
Commit de8a66d4ce5 removed our own DPI handling for the one found
it Clutter, but broke resolution updates at runtime (for instance
when setting the "Large Text" option in Universal Access).
appDisplay: Don't show apps in NoDisplay categories in the All view
We explicitly include NoDisplay applications in the ShellAppSystem because
we want app tracking for them, but we explicitly filter NoDisplay applications
out when showing them to the user because we don't want to show them to the
user. We also based our "All" apps view on a flattened list of apps. While
we did check for NoDisplay on the app item itself, we didn't check against
its parents. Refactor the app display view to not use a separate flat list
of applications, but instead a concatenation of all the applications in all
the loaded categories.
js: Remove unnecessary versions of clutter_actor_get_children
clutter_actor_get_children requires making a temporary GSList from
a linked list structure, and then creating a JS Array from that GSList.
For simple cases like the number of children, use clutter_actor_get_n_children.
Tim L [Fri, 8 Jun 2012 08:26:58 +0000 (18:26 +1000)]
modalDialog: show dialogs on monitor with the mouse pointer
Show the dialog on the monitor containing the pointer, rather than
the monitor with active focused window. This brings it inline with
the behaviour seen when launching applications.
Remove the focusMonitor/focusIndex from LayoutManager. These
properties were only used by the modal dialogs. Remove them since
they are not being used elsewhere.
Alban Browaeys [Sun, 20 May 2012 21:36:27 +0000 (23:36 +0200)]
popupMenu: do not overflow the currentItems
Do not overflow currentItems array. If the Menu section is filled
via model items-changed callback the position in the model passed to
the RemoteMenu _modelChanged can be a to be added asynchronously
action-added. Thus the item does not yet exists in the currentItems.
endSessionDialog: Factor out _updateDescription from _updateContent
_startTimer adds a tweener to implement the description countdown, which
updates the entire content on each iteration, including the icon. This
causes a significant impact on performance, especially when accessibility
is enabled, as it causes a flood of AtkObject:state-change:showing events.
As the countdown only affects the description, factor out _updateDescription
and use it in _startTimer, and only do a full update of all contents when
necessary.
Christian Weber [Tue, 8 May 2012 20:03:17 +0000 (22:03 +0200)]
searchDisplay: Use the rowLimit we pass to the IconGrid
When displaying children, we need to make sure that we use the rowLimit
property that we pass to iconGrid, rather than assuming that it's
always MAX_SEARCH_RESULTS_ROWS in case some subclass (in an extension maybe)
wants to do something different.
Depending on the number of accounts, the type or simply the network,
there may be a noticable lag between setting the status and the actual
status change.
Use the new user-status-pending icon to indicate progress.
NetworkMenu: show notifications for failed VPN connections
Refactor NMDeviceVPN to be more like the other NMDevices, including
having a valid getSectionTitle() and emitting signals when the
underlying connection changes state.
Use the existing notification infrastructure to hook these signals
to actual notifications (including some code consolidation).
Florian Müllner [Wed, 28 Mar 2012 13:25:33 +0000 (15:25 +0200)]
workspacesDisplay: Connect to 'notify::n-workspaces' early
Currently we only connect to the 'notify::n-workspaces' signal the
first time the overview is shown, which means we will miss any
changes to the workspace layout in the meanwhile.
In particular, the decision of whether the workspace switcher should be
shown is taken before the dynamic workspace handling takes over, and is
thus based entirely on the value of the num-workspaces user preference
rather than the actual number of workspaces.
Just connect the signal in _init() (with the nice side-effect to make it
explicit that the signal handler won't ever be disconnected).
a11y: setting the proper role/label_actor for SearchResult.content
role/label_actor should be used for the actor that will receive
the focus. In some cases it was also (wrongly) set on the
container, so using an AT like Orca, it exposed both.
Ensure that the UI is updated when a connection changes name or id,
even if it was already known by a device.
Also, use less private properties on NMConnection objects, as they
can become stale and cause problems.
Matthias Clasen [Thu, 24 May 2012 03:37:09 +0000 (23:37 -0400)]
Add an initial-setup mode
Use the newly introduced kiosk mode functionality, and define an
'initial-setup' mode that is suitable for
https://live.gnome.org/GnomeOS/Design/Whiteboards/InitialSetup
Florian Müllner [Tue, 29 May 2012 19:31:02 +0000 (21:31 +0200)]
sessionMode: Add 'input-method' to status icons in user mode
We now drop all status icons that are not explicitly enabled, which
breaks the ibus icon. Add it to the list of allowed icons until we
merge it with the keyboard one.
projects / gnome-shell.git / log